Stay informed about our news and promotions: Subscribe Unsubscribe
Cart: 0,00 €
Shipping: 0,00 €
Total : 0,00 €
Manufacturer
Price
In stock
-- Price: lowest first Price: highest first Product Name: A to Z Product Name: Z to A In-stock first sort by
XLC brass brake housing ferrule. Sold per piece.
XLC plastic Gear ferrule (1 pc). For 4 mm gear housing.
The XLC clip allow your brake or derailleur housing to be hold on the frame of your bike.
M6 fixing screws for 20 mm disc or V-brake caliper
The fixing screws M5 brake disc XLC allows you to fix your disc brake hub on your front or rear drive. Torx head can be clamped reliably.
White sheath brake road bike sold by the meter. Diameter 5 mm. Low resistance to friction. Add to your cart as many quantities as necessary.
WTP Stainless steel brake cable. Compatible front and back (to be cut with special pliers wire cutter ).
XLC derailleur cable. Diameter 1.1 x 2000 mm stainless steel. Low frictional resistance, efficient and accurate change. Suitable for Shimano and SRAM.
Brake cable type bike in stainless steel. Diameter 1.5 mm. Single length of 1700mm. Compatible also for brakes BMX bikes and children's bikes. Round head and cylindrical. Requires a special cable cutter to be cut or a good cutter classic. Very good quality / price ratio.
The brake pads V-brake XLC piece are 70mm long and fit on most type brakes V-brakes on the market. Excellent quality / price ratio.
Essential for your brakes V-brakes, aluminum elbow at 90 ° has an internal tubing to guide the brake cable. Compatible front and back.
WTP cantilever brake pads, designed for central pulling brakes such as cyclocross brakes.
Kit ball screws and spacers for AVID AVID disc brake adapter. Suitable for a brake.
The Shimano XTR derailleur cable is stainless steel coated with...
Shimano Altus brake lever BL-M421 V-Brake 2 fingers black (left)
Shimano Altus brake lever BL-M421 V-Brake 2 fingers (right)
Those housings Hooks XLC BR-X13 can maintain two housings together to prevent friction between them or against the...
Shimano Altus brake lever BL-M421 V-Brake 2 fingers (left)
Shimano Altus brake lever BL-M421 V-Brake 2 fingers black (right)
The 120 ml of brake oil DOT4 HAYES can serve 2-3 brakes, depending on the length of hose.
XLC road and MTB Teflon Brake cable is a stainless steel covered with a Teflon coating. The Teflon coating has several advantages: it offers less resistance to friction in the duct brake for better braking and requires less maintenance. Suitable for road and MTB.
The tips of Shimano brake cables are needed to prevent the ends of the brake cables fraying.
XLC RP-V01 V-Brake pads 72 mm black (4 pc)
Shimano V-brakes pads molded one-piece threaded rod. Composed M70T4 / M70W. Only rims machined sidewalls. Particularly effective in wet conditions, low wear and low attenuation rims. Compatible with XT, LX, Deore, Alivio, Acera and Altus (BR-M580/530/570/510). Length 70mm.
Brake pads for Shimano cartridge door pads. For XTR, XT, LX and Deore. Good efficiency in dry weather, high wear resistance in wet weather. Pad thickness greater than 1 mm M70R2 for extreme conditions. Supplied with pins.
Brake pads Shimano M70R2 door pads cartridge. Good efficiency in dry weather, high wear resistance in wet weather. Pad thickness greater than 1 mm M70R2 for extreme conditions. Supplied with pins.
Brake pads Shimano M02 Resin Disc Brake Shimano Deore M555 disc. Supplied with springs. Reduce the operating noise while braking. Less powerful and durable than metal plates.
This adapter bracket allows Avid disc brake mounting a disk on a 203mm fork ROCK SHOX BOXXER internantional standard (51mm) to international standard bracket.
The adapter QR20 front disc brake IS / IS allows mounting a brake disc of 203mm diameter as standard international (51mm). Screws not included.
This adapter allows the installation of Avid disc brake in a post mount (74mm) on a standard fork post mount brake disc diameter 203mm.
The lever Shimano R550 is designed for mounting joysticks way to flat handlebars. Draw compatible only with road brake calipers. Do not use a mountain bike brake levers for V-Brakes for mounting road with brakes, it does not work, and can even be dangerous. Left lever.
This adapter allows the installation of Avid disc brake in a Post Mount (74 mm) on a fork in the standard international standard (51 mm) brake disc diameter 160 mm. Also suitable for converting a standard rear caliper AM International Disk 140 mm. ...
This adapter allows the installation of Avid disc brake in a Post Mount (74 mm) on a fork in the international standard (51 mm) brake disc diameter 160 mm.
The lever Shimano R550 is designed for mounting joysticks way to flat handlebars. Draw compatible only with road brake calipers. Do not use a mountain bike brake levers for V-Brakes for mounting road with brakes, it does not work, and can even be dangerous. Right lever.
This adapter allows Avid caliper mounting a drive to the International Standard (51 mm between the mounting screws) on a fork Standard Postmount (74 mm) with a 185mm diameter disc. Screws not included.
XLC-piece cantilever pads. Pack of 4 pads. Length: 70 mm. Black.
V Brake pad holders XLC Bicolor visibility for rapid wear Set of 4 Length: 70 mm Color: red / black.
XLC RP-V01 V-Brake pads 72 mm 3 tone (4 pc).
XLC BR-X10 Brake ferrules aluminium Red (set 10). Ideal for customizing your bike and put the finishing touches.
XLC BR-X10 Brake ferrules aluminum gold (set 10). Ideal for customizing your bike and put the finishing touch.
This adapter allows SHIMANO mounting a rear disc brake Postmount standard (74mm) on a bracket under the international standard (51mm) for a disc diameter 203mm.
Brake lever V-brake Shimano Deore M591 3 fingers left to type brakes V-Brakes. Three fingers. Cable tension and keeps adjustable.
Replacement pads for rubber V-Brake RP-V01 Excellent all-weather kit 4 Length: 72 mm Color: black / red
This adapter allows the installation of Shimano disc brake Postmount the standard (74mm) on a fork in the International Standard (51mm) for a disc diameter 203mm.
Brake lever V-brake Shimano Deore M591 3 fingers right brakes V-Brakes. Three fingers. Cable tension and keeps adjustable.
The adapter XLC BR-X21 allows the mounting of a front disc brake Postmount the standard (74 mm spacing) on a fork in the International Standard (51 mm spacing) for a disc diameter of 160 mm. The BR-X21 adapter XLC also mounting a bracket on a frame PM IS for 140 mm disk....
This adapter allows Avid caliper mounting a disk Standard Postmount (74 mm between the mounting screws) on a fork Standard Postmount to a disc 185mm in diameter. Comes with two long screws.
This adapter allows the installation of Shimano disc brake Postmount the standard (74mm) on a standard fork Posmount for a disc diameter of 203mm.
Kit brake cables and housings road and MTB SHIMANO composed of two cables and two sheaths. Gaines Ø 5 mm x 2.2m (1 pc). Stainless steel cables Ø 1.6 mm x 1 m (1 pc) and 1.6 mm Ø x 2.05m (1 pc). Kit brake cables...
This adapter allows SHIMANO mounting a standard Postmount caliper disc (74mm) on one leg disc under the International Standard for a 180mm diameter disc.
This adapter allows SHIMANO mounting a front disc brake Postmount the standard (74mm) on a fork in the International Standard (51 mm) for a disc diameter 160mm.
This adapter allows the installation of Shimano disc brake Postmount the standard (74mm) on a bracket under the international standard (51mm) for a disc diameter 160mm.
Shimano M05 Resin pads are designed for cable disc brakes Shimano M525, M515, M495, M475, M465 and C501. The plate resin provides powerful braking and reduce brake noise. Supplied with springs.
This adapter allows SHIMANO mounting a disk caliper International Standard (51mm) fork on a bike the International Standard for a 180mm diameter disc.
The adapter XLC BR-X24 allows the installation of a rear disc brake Postmount standard (74 mm spacing) on a framework International Standard (51 mm spacing) for a disc diameter of 180 mm. Aluminium CNC lightened unique desgin.
The adapter XLC BR-X22 allows the installation of a rear disc brake Postmount standard (74 mm spacing) on a framework International Standard (51 mm spacing) for a disc diameter of 160 mm. Aluminium CNC lightened unique desgin.
This adapter allows the installation of Shimano disc brake Postmount the standard (74 mm) on a fork in the International Standard (51mm) for a disc diameter 180mm.
WTP brake cables and housings set. Includes 2 stainless steel cables, housings and cables ends.Compatible for road and MTB.
This adapter allows HAYES mounting a disc brake Postmount the standard (74mm) on a framework International Standard (51mm) for a disc diameter 160 mm.
The adapter XLC BR-X23 allows the mounting of a front disc brake Postmount the standard (74 mm spacing) on a fork in the International Standard (51 mm spacing) for a disc diameter of 180 mm. Aluminium CNC lightened unique desgin.
Brake caliper Shimano Acera V-brake BR-M422 Silver (back).
HAYES Dot 4 brake oil (350 ml)
Brake Lever Shimano Deore V-Brake BL-M590 (left)
The disc brake pads Shimano BS01 organic resin is resistant to wear, powerful, silent. Brake pads come with spring. SHIMANO BS01 platelets are also compatible with disc brakes Tektro. Supplied with pin and spacer plates.
Brake Lever Shimano Deore V-Brake BL-M590 (right)
XLC BR-C01 Cantilever brake caliper black aluminum front or rear. Forged aluminium with fixation, without lever or cable.
Brake caliper Shimano Acera V-brake BR-M422 Silver (front).
V-Brake Caliper XLC sold with forged aluminum screw, lever or without cable. Comes with aluminum elbow.
XLC BR-V03 V-brakes aluminium silver (front or rear). Take 2 units for a bike. Cartridge pads. Cable guide included. Cable not included.
This adapter allows the installation of Shimano disc brake international standard (51mm) on a fork Postmount (74mm) for a disc diameter 180mm.
XLC brake levers BL-V02 are specifically designed to be mounted with twist grip Shimano RS43 type or another. Lever length: three fingers. Weight 196 g per pair.
XLC brake lever V-Brake Material: Alu four fingers for better grip Rubberized Compatible with twist grip throttle and push-pull.
Brake Levers XLC mini V-brake aluminum 2 finger Weight: 81 g. For U-Brake and Cantilever-/V-Brake. Adjustable Guard.
Disc brake pads Sintered XLC extreme resistance to heat per set (1 set = 2 blocks, including spring) side of the pad for disc brakes to Avid Juicy gold 3 / 5, Altimate
Pads for disc brakes XLC per set (1 set = 2 blocks) side of the brake lining for Avid Code Orange, Code 5
Brake Levers BL-C01 XLC for cantilever brakes, that is central to drawing. The brake levers BL-C01 XLC are not compatible with the V-type brakes side-pull brakes.
XLC brake lever V-Brake Material: Alu 3.5 Compatible with fingers twist grip throttle and thumb
XLC brake disc 6 holes 160 mm
The disc brake pads metal SHIMANO M01 are designed for disc brake Shimano Deore M555. The brake pads come with the springs.
The adapter XLC BR-X27 allows the mounting of a front disc brake Postmount the standard (74 mm spacing) on a fork for a standard Postmount Disk diameter 180 mm. Aluminium CNC lightened unique desgin.
The adapter XLC BR-X24 allows the installation of a rear disc brake Postmount standard (74 mm spacing) on a framework International Standard (51 mm spacing) for a disc diameter of 203 mm. Aluminium CNC lightened unique desgin.
The adapter XLC BR-X25 allows the mounting of a front disc brake Postmount the standard (74 mm spacing) on a fork in the International Standard (51 mm spacing) for a disc diameter of 203 mm. Aluminium CNC lightened unique desgin.
The adapter bracket Shimano front disc AM / PM 180mm SHIMANO allows mounting a disk brake Postmount the standard (74mm) on a standard fork Posmount for a disc diameter of 180mm.
SHIMANO D02S sintered disc brake pads for SHIMANO Saint M810 brakes
Brake Lever Shimano Deore LX BL-T660 V-Brake Silver 3 fingers (left) bikes designed for recreation, ergonomic and quiet.
Brake Lever Shimano Deore LX BL-T660 V-Brake Silver 3 fingers (right) designed for recreational bikes, ergonomic and quiet.
The adapter XLC BR-X28 allows the mounting of a front disc brake International Standard (51 mm spacing) on a fork in the International Standard for a disc diameter of 180 mm. The BR-X28 adapter XLC also mounting a bracket on a frame IS IS for 160 mm disk.
The adapter XLC BR-X29 allows the mounting of a front disc brake International Standard (51 mm spacing) on a fork in the International Standard for a disc diameter of 203 mm. The BR-X29 adapter XLC also mounting a bracket on a frame IS IS for 180 mm disk.
XLC MTB V-Brake pads ABS 78 mm (4 pc)
This adapter allows the mounting of a disc brake caliper International Standard (51mm pitch) on a frame with fixing brake International Standard for a 180mm diameter disc.
Brake lever XLC Material: Alu Fingers 2 Weight: 180 g. For Rapidfire
SHIMANO E01S sintered disc brake pads for SHIMANO M575 brakes
Additional levers XLC 26.0 mm diameter Cross BL-X01 (pair).
Disc brake pads MAGURA Type 2.2 Endurance for disc brakes MAGURA MAGURA Louise and Clara until 2001 until 2000. Colours: red
Hydraulic brake pads MAGURA green, soft compound for anodized wheels and ceramics. The two pairs.
HAYES mount adaptor front Post to Post 203 mm
Pad holders V-Brake Cartridge XLC any time by Owner or excellent thin Design 4 Pack Length: 72 mm Color: black / red
XLC brake disc 6 holes 180 mm diameter
SHIMANO Deore M590 V-brake front Black Cold forged for maximum rigidity, providing a powerful and progressive braking. Pads 70 mm cartridge (ideal to change your brake pads without disturbing). Excellent quality / price ratio. Sold without aluminum elbow.
Brake lever XLC Material: aluminum 2 finger Weight: 180 g. For Rapidfire
HAYES mount adaptor rear Post to IS
Brake disc diameter XLC 6 holes 203 mm
SHIMANO Deore M590 V-brake Rear Black
Disc brake pads MAGURA Type 2.1 Performance for disc brakes MAGURA MAGURA Louise and Clara until 2001 until 2000.
WTP Wind disc Brake rotor 160 mm. Comes with 6 T25 Torx screws.
Shimano R550 levers are designed to mount flat handlebars for road levers. Draw compatible only with road brake calipers. Do not use a mountain bike brake levers for V-Brakes for mounting road with brakes, it does not work, and can even be dangerous.
Original disc brake Avid Juicy and BB7 brake pads. You have the choice of organic material (brake more powerful but less durability) and sintered metal pads (brake less powerful, more durable and all weather).
The disc brake pads Shimano M04 resin, designed for disc brakes Shimano Deore XT M755, come with springs. The pair.
The brake calipers are Avid Single Digit 5 brakes V-Brakes with forged aluminum cold pads molded in a stainless steel screws and a cable guide attached. Brakes Avid Single Digit 5 is an excellent price / quality ratio. Compatible front and back. Take two quantities for a bike.
SHIMANO Deore M590 V-brake front Silver
SHIMANO M06 metal pads have a long life, are strong, powerful and as effective in dry than wet. They can be noisy at times. See bottom of page compatibility.
AVID Code disc brake pads Organic with steel back. You may choose organic material (more powerful but less durability) and sintered metal pads (brake less powerful, more durable and all weather).
SHIMANO Deore M590 rear V-brake Silver is cold forged for maximum rigidity, providing a powerful and progressive braking. Pads 70 mm cartridge (ideal to change your brake pads without disturbing). Excellent quality / price ratio. Sold without aluminum cable guide.
Set of 4 pads + aluminum door pads for Shimano XT center-pull brakes (cantilever). Suitable for brake calipers Shimano XT BR-M900-C, BR-M900, BR-M737 BR-M565 and E-.
Shimano Center Lock Adapter 6 holes allow for mounting a disc brake international standard 6 holes on a hub Shimano Center Lock (fluted), in or out. A hub shaft 15 mm, choose the model DT SWISS .
Pads for disc brakes Sintered XLC Pro Extreme resistance to heat per set (1 set = 2 blocks, including spring) side of the pad for disc brakes Shimano XTR for gold (BR-M965/966), Deore XT ( BR-M765), Saint
Hydraulic brake pads for all MAGURA standard black rims polished sides. The two pairs.
Hydraulic MAGURA brake pads for standard gray-sided anodized wheels and ceramics. The two pairs.
Pads + brake pad holders XLC MTB V-Brake V-08 72 mm black / red (for 2 calipers).
AVID Juicy and BB7 disc brake pads Organic with steel back
Pad holders V-brake Cartridge XLC Properties always excellent kit 4 Aspect Carbon Length: 72 mm Color: three
Disc brake pads MAGURA Type 4.1 Performance for Magura Julie disc brakes from 2008. Supplied with cotter pin. The pair.
XLC kit brake hose: 5 x 2500 mm Diameter Cable: 1350/2350 mm stainless steel, maintenance-free autograissant, waterproof sleeve 6 stops, 3 donuts, 2 cable fitting. Cable Head Road on one side and mountain on the other: just cut the head is not used.
Disc brake pads Sintered XLC extreme resistance to heat per set (1 set = 2 blocks, including spring) side of the pad for disc brakes for gold Shimano Deore Shimano 485 mechanical
Pads for disc brakes Sintered XLC Pro Extreme resistance to heat set the other side of the brake lining to gold Tektro mechanical and hydraulic
Caliper brake V-brake BR-V01 XLC black forged aluminum (front or rear). Supplied with fixing screws, without lever or cable. Aluminum elbow delivered. Weight 161 g. 70 mm pads.
Disc brake pads MAGURA Type 4 disc brakes MAGURA Julie from 2008. Supplied with cotter pin. The pair.
Disc brake pads MAGURA Type 3.2 Endurance for disc brakes MAGURA MAGURA Louise Clara since 2002 and since 2001, come with cotter pin. The pair.
Disc brake pads MAGURA Type 3.1 Performance for disc brakes MAGURA MAGURA Louise Clara since 2002 and since 2001, come with cotter pin. The pair.
This adapter disc brake SHIMANO allows mounting a disk to a 203mm rear brake caliper International Standard (51mm) on a bracket under the international standard.
Disc brake pads MAGURA Type 6.2 Endurance for disk brakes MAGURA Louise since 2007, Julie HP since 2009 and Marta and Marta SL since 2009. Supplied with a screw. The pair.
Disc brake pads MAGURA Type 6 for disk brakes MAGURA Louise since 2007, Julie HP since 2009 and Marta and Marta SL since 2009. Supplied with a screw. The pair.
Caliper XLC Comp V-brake BR-aluminum V02 (black front or rear). Suitable for a wheel. Take 2 units for a bike. Inline cartridge. Weight 161 g. Elbow delivered. Lever and cable not included.
The SHIMANO R780 road brake levers are designed to match a flat bar assembly on your road bike. The SHIMANO R780 road brake levers are specialy designed for road calipers and are not compatible with MTB cable brakes.
Hydraulic MAGURA brake pads red, soft rubber, polished rim. These shoes are especially recommended for trial. The two pairs.
WTP Wind disc Brake rotor 180 mm. Comes with 6 T25 Torx screws.
XLC brake lever V-Brake with integrated mini bell. Material: aluminum 4-finger ergonomic design with rubber, for a better grip Suitable for rotary switch poigée Weight: about 233 gr
Shimano mineral oil allows the purging of your Shimano hydraulic disc brakes MAGURA or (remember to check the consistency of mineral oil with your disc brake). 1 liter bottle of mineral oil.
This adapter allows the installation of Shimano disc brake international standard (51mm) on a standard fork Postmount (74mm) for 203mm diameter disc.
WTP brake housing 5 mm black (30 m roll)
The disc brake Shimano BR M416 cable in or out is very easy to mount on any frame or fork leg with a drive to use mountain bikes, cyclo cross or leisure. Delivered without an adapter and diskless (RT53 and RT51 models sold separately). Standard Postmount to brake.
This adapter allows the mounting of a disc brake caliper International Standard (51mm pitch) on a fork in the International Standard for a disc diameter of 203mm.
The cantilever brake caliper Avid Shorty 4 cantilever brake is designed for mountain biking and cyclocross. Compatible with road brake levers. Molded skates. Stainless steel screws. Mounting the front or rear.
Via SRAM brake levers (pair). For a practical leisure.
This adapter allows the installation of Shimano disc brake international standard (51mm) on a standard fork Postmount (74mm) for 170mm diameter disc.
Caliper XLC Comp V-brake BR-aluminum V02 (white front or rear). Suitable for a wheel. Take 2 units for a bike. Inline cartridge. Weight 161 g. Elbow delivered. Lever and cable not included.
WTP brakes cables and housings water resistant set
XLC brake duct diameter 5 mm Sturdy Spiral steel inner sleeve inner Polymer Few frictional resistance Color: Black
The DT SWISS Center Lock adapter can switch from one type of fastening to a fixation lock Center International Standard 6 holes. Easy installation with only the center screw which clamps the adapter and the disk: smart! Very lightweight: 29.5 g.
Avid G2 Cleansweep The disc is a disc brake steel surface. Drill 6 holes. Choose the right size to fit your caliper. Otherwise, consider buying an adapter to mount your new drive.
The bleed kit disc brake is compatible with Avid Juicy brakes and Code. It allows for two brakes.
Kit disc brake cable BR-D02 XLC 160 mm including the disc brake caliper, 160 mm disc, the brake lever, the shaft and the brake cable. Postmount Adapter / international standard included.
SL MAGURA brake disc, from the 2004 vintage.
The cantilever brake caliper Avid Shorty 6 Cantilever Brake is a particular for mountain biking and cyclocross. Compatible with road brake levers. Pads cartridge-type V-brake (70mm). Stainless steel screws.
The disc brake Shimano Deore M595 is an excellent disc brake mid-range, ideal for trekking. Powerful thanks to its two opposing pistons, while it has a large disk brake. Excellent quality / price ratio. Mounted rear brake caliper, hose and lever.
The disc brake Shimano Deore M595 is an excellent disc brake mid-range, ideal for trekking. Powerful thanks to its two opposing pistons, while it has a large disk brake. Excellent quality / price ratio. Front brake caliper sold mounted, hose and lever.
MAGURA SL Magnesium disc brake rear 160 mm IS 2011 CLEARANCE!
The new rim brakes MAGURA HS 11 is derived directly from HS 33 brakes, designed specifically for bikes and urban bikes / trekking. Brake MAGURA HS 11 remains the symbol for everyday users, "vélotafeurs' reliability, durability, simplicity.
The AVID BB7 mechanical disc brake 160 mm is designed to be assembled...
XLC Disc Brake BR-D01 2-piston hydraulic tank with compensation. Aluminum lever with adjustable spacing, automatic wafer spacing hose can be cut. Mounting international standard IS 2000. DOT4 brake fluid.
The HS33 MAGURA rim brake is fully hydraulic. 25% more powerful than his master HS11 with 14mm piston. Handle (master cylinder) compact radial lever U-blade aluminum. Turbo Pad Adjuster (TPA) to compensate for wear of the pads in stock. Comes with arch brace. Within minutes!
After several decades, MAGURA the challenge of improving the hydraulic brake HS33, the best rim brake. Wear take-up pads for wheel (no tools). Two clamp screws. Proctection cover the connection of the hose. New design of bracket and arch. Same front and rear. Lever 2 fingers.
After several decades, MAGURA the challenge of improving the hydraulic brake HS33, the best rim brake. Wear take-up pads for wheel (no tools). Two clamp screws. Proctection cover the connection of the hose. New design of bracket and arch. Same...
Sign up for our newsletter and and enjoy5% on your first order:
Civility Mr Ms
Last name
First name
Date of birth
Mail
Password
+33 (0)5 62 62 38 21