Stay informed about our news and promotions: Subscribe Unsubscribe
Cart: 0,00 €
Shipping: 0,00 €
Total : 0,00 €
Manufacturer
Price
In stock
-- Price: lowest first Price: highest first Product Name: A to Z Product Name: Z to A In-stock first sort by
The adjustment tool Shimano M970 XTR crankset for FC17 sets the play of the left crank of the pedals Shimano XTR M970.
The tool Shimano TL-FC16 enables the tightening of the screws used to take up slack during assembly of the screw of the crank left Shimano Hollowtech II type.
The wrench axis SHIMANO TL-PD40 Pedal allows you to remove the axle of your pedal SHIMANO to maintain the bearings.
The former tractor for Campagnolo cranks VAR Power Torque allows disassembly of Power Torque cranks mounted on the force axis. Compatible only with aluminum cranks. Contact surfaces designed to limit the risk of damage to the crank. Steel parts of high quality.
The tip of your chain tool SHIMANO TL-CN32 is interchangeable. ALIBABIKE offers tip sold separately to change yours
Complement SHIMANO FC15 can use a standard crank extractor on the pedal shaft oversized Octalink or ISIS type.
The pin wrench Shimano TL-FC21 keeps stacks of trays of Shimano for tightening the screws. Small budget for a tool to tighten the screws quickly and efficiently board.
Kit 2 cleaning brushes for tape XLC TO-CS01 lets you clean your tape in depth and thereby increase the life of your transmission (chain, cassette, chainrings and rear derailleur).
Extractor cranks XLC CS02 is required to remove a crank of the bottom bracket. For oversize crank shaft type Octalink or ISIS, crank extractor XLC CS02 should be associated with the tool SHIMANO...
Chain tool XLC
Spanner XLC
Freewheel remover Suntour XLC, with two lugs for 23 mm tool
Freewheel remover for Shimano UG XLC
The freewheel XLC is for the removal of Shimano freewheel MF (Multiple Freewheel). It is longer than the model SHIMANO (within 25 mm). Requires a ratchet wrench 1 / 2 "or 21 mm wrench.
CA03 tape remover XLC for Shimano and SRAM cassettes. To wrench 24 and 19 mm ratchet 1 / 2 ". Can also be used for tightening the brake discs Center Lock type .
XLC TO-PD03 pedal wrench (15 mm) combined with crankset wrench of 14/15 mm.
Freewheel remover Suntour XLC, with 4 catches for 24 mm tool
The whip chain XLC TO-CA02 for 7 and 8 speed transmissions can easily remove your tape for replacement or your cassette body. A must in every tool box, low price.
WTP tool for Campagnolo cassette with rubber sleeve to mount and dismount effortlessly Campagnolo cassette. The guide provides built-to intervene safely on the tape. Requires the use of a
WTP cranks tool extractor is compatible with square, Octalink and ISIS cranks.
The key to TO-PD01 XLC pedal is very useful to loosen and tighten your pedals firmly. The lever arm of the pedal wrench XLC is important and can operate without effort. Correct tightness of your pedals is a concept of security.
The monitoring tool wear chain XLC controls the state of the chain to prevent wear on other transmission parts. The measure of chain wear is by measuring its elongation shall not exceed 1%. For lines 8 and 9 speed only.
Freewheel ACS only from 14 to 15 teeth
SHIMANO cassette remover tool TL-HG09 for Capreo allows to remove the SHIMANO...
The disassembled cassette HG XLC TO-CA01 is very convenient due to its rod which is housed in line with your rear wheel, once removed the quick course. The handle of the cassette apart XLC provides good leverage. Its material is pleasant to the touch.
WTP chain whip with rubber handle has a reinforced construction that can remove effortlessly and securely all kind of cassette or freewheel.
CrMo pedal wrench XLC 14/15/24 mm. The key pedal XLC provides a firm and precise tightening of your pedals on your pedal cranks. The narrow width makes it possible to tighten the largest majority of pedals.
Freewheel ACS only from 16 to 22 teeth.
WTP Chain Rivet Extractor strong, effective and lightweight.
An excellent value in a basic do-it-all chain tool. This 2-piece cast CrMo chain tool features a hollow removable handle which can be slipped over a small Allen wrench to provide extra leverage. The Universal Chain Tool includes a chain hook to make chain repair easier, is compatible...
The bottom bracket apart XLC TO-BB2 allows removal of Bottom Bracket Shimano Octalink and square axes. The handle of the bottom bracket apart XLC can tighten and loosen your body effortlessly.
Tool Shimano TL-FC32 enables the assembly of bowl bearings for cranksets Hollowtech II type, road and mountain biking. An indispensable tool affordable if you want to mount yourself a pedal-type Hollowtech II, or simply change your bowls. Compatible with other brands (FSA, Truvativ,...
Insert for CAMPAGNOLO Power Torque UT-FC090
BB Tool For XLC cartridge bottom bracket Shimano and ISIS Drive For xl'w Schlüsselweite 24 mm square or 1 / 2 "
The whip chain XLC TO-CA02 for 9 and 10 speed transmissions can easily remove your tape for replacement or your cassette body. A must in every tool box, low price.
Tool for Campagnolo UT-BB110 screws Ultra Torque bottom bracket allows for tightening the screw axis of Campagnolo Ultra Torque. Essential for easy installation and quality. The screw connects the two cranks together and large stresses are applied on it: so do not overlook its tightening.
Tool Bottom Bracket XLC 8 Nut, compatible with ISIS Drive
WTP bottom bracket cups tool is an essential tool to ensure the assembly or disassembly of the bottom bracket cups. The WTP bottom bracket cups tool is compatible with Shimano Hollowtech II (XTR, XT, LX, Deore, Dura-Ace, Ultegra, 105, Tiagra, Sora), Truvativ Giga X-Pipe, Race Face X-Type, and FSA Mega Exo.
The cranks apart XLC handled TO-CS01 can effortlessly remove the cranks of your pedals, it is in square shaft, ISIS or Octalink.
The tool allows SHIMANO FW30 disassembly of threaded freewheel on the hub, as opposed to cassette system requires a different tool, the HG10. Make sure your freewheel is a Shimano well or at least your freewheel apart with this tool, because there are many different standards.
XLC TO-BB01 Bottom Bracket tool with bolt tool is designed for external bearings like Shimano Hollowtech II and Truvativ GXP, but also CAMPAGNOLO and many other brands. Replaces SHIMANO FC32 and FC16 in one tool, easier to handle.
WTP tool for Shimano cassette with rubber sleeve to mount and dismount effortlessly Shimano cassette. The guide provides built-to intervene safely on the tape.This WTP tool enables you to the Center Lock rings of your disc brake rotors.
The cranks apart PRO built-in handle with ease of dismantling the cranks of your pedals, it is in square shaft, ISIS or Octalink.
The tool disassembles CYCLO TOOL bottom bracket suitable for ISIS bottom bracket and Shimano M952 XTR box. Also allows for tightening the nut holding the stars Specialties TA Carmina / Vega. Cast aluminum construction for lightness and strength.
SPECIALTES TA Wrench for AXIX lock ring. Made In France.
The cleaning kit transmission XLC TO-CS03 includes a cleaner channel closed (to receive a chain degreaser), a brush and a stiff brush to clean the tape. With the kit XLC, Entrena your transmission without removing the best.
The tool assembly bottom bracket Shimano TL-UN74-S allows the assembly and disassembly of the Bottom Bracket Shimano or adopting the same standard, whether axis square or star (Octalink).
Crank Extractor Shimano FC10 is required to remove a crank of the bottom bracket. For oversize crank shaft type ISIS or Octalink, Shimano crank extractor FC10 must be associated with the tool SHIMANO
The tool SHIMANO LR10 to mount and remove the nuts cassette Shimano and SRAM, as well as road biking. This tool also allows the tightening / loosening nuts for Center Lock disc, Shimano-specific system. For use with a wrench or ratchet.
Wippermann chain tool super compact, ideal for saddle bags and bags is drink.
The tool UT-BB080 CAMPAGNOLO allows you to disassemble your bottom bracket square shaft. Campagnolo compatible only boxes.
The SHIMANO TL-FC33 tool allows assembly and disassembly basins SHIMANO Hollowtech II type. Conveniently connects to a ratchet. Compatible with FSA cranks, Truvativ, SRAM ...
Remover BB TRUVATIV Giga Pipe Special to 8 notches. Attaches to a ratchet.
The chain cleaning kit PRO comes with 75ml of liquid degreaser for chains. Ideal for cleaning the chain without (too) get dirty and most importantly, without removing the chain. Increases the life of your chain.
The tool UT-BB130 CAMPAGNOLO to mount and dismount Campagnolo Ultra Torque pans easily and cleanly. Attaches to ratchet. Also is activated by default wrench or 24mm pipe.
The SHIMANO TL-UN96 tool is designed for assembling and dismantling of the bowl Shimano Octalink standard.
The Shimano chain tool CN27 is compatible for all channels SHIMANO: UG, IG and HG, both in 7, 8, 9 or 10 speed. An indispensable tool in your workshop. The CN27 is a top model accuracy because nothing is more important than a good chain riveted ...
Allows mounting / dismounting unit Pothole TRUVATIV GXP and Howitzer. Heat-treated steel. Requires a 32mm wrench or ratchet wrench 1 / 2 inch
Clever Pack Full Chain Cleaner FINISH LINE! It includes the case of cleaning the chain, one of Ecotech Degreaser 120ml and 60ml Lubricant Cross Country. What quickly and easily maintain your chain regularly. And a chain well maintained can last up to 2 times longer ...
Tightening tool Shimano M970 XTR crankset FC35 for you to properly tighten the nut on the left crank of the pedals XTR M970.
Tool Shimano TL-UN66 allows assembly and disassembly and Bottom Bracket Shimano compatible (square or Octalink). Not suitable for embedded enclosures Hollotech type II. Mounts on a ratchet. Can also be used with a spanner.
The whip chain SHIMANO TL-SR21 keeps the tape when removing the nut-cons. This is one of the tools needed to easily perform a change of tape. Chain whip to 3 / 22 ".
The professional tool SHIMANO control wear TL-CN41 chain to define the state of wear of the chain to proceed with its replacement. Replacing a worn chain prevents premature wear of the plates and gears.
The chain tool UT-CN300 CAMPAGNOLO is the only chain tool approved for your chain riveting Campagnolo 11-speed. Warning! A riveting chain tool with all the other Campagnolo UT-CN300 does not guarantee the quality of closure and can be dangerous if your chain breaks in full effort.
The professional tool disassembles BB CYCLO TOOL (07700) allows easy removal of any type of bottom bracket (the screw axis M8, M12, M14 and M15). Screw the tool head in the axis of the housing held in place. Screw to the contact against the case, then desserrerz it.
SURFACING TOOL CYCLO Tool bottom bracket (07 800). Comes with 2 sets of guides: BSC, not Italian. Professional tool.
The tool box pedal thread CYCLO TOOL (07825) can tap the bottom bracket frame. Supplied without taps. Professional tool.
Sign up for our newsletter and and enjoy5% on your first order:
Civility Mr Ms
Last name
First name
Date of birth
Mail
Password
+33 (0)5 62 62 38 21